1. Mode: PZ30 Terminal Power Distribution Cabinet
2. Application Range:when voltage is less than 380V and used in terminal circuit ( single phase three wire or single phase five wire) whose current is less than 125A.
3. Certificates: Test report, 3C certificate
Terminal power distribution cabinet combined device can be used when voltage is less than 380V and used in terminal circuit ( single phase three wire or single phase five wire) whose current is less than 125A to control electric equipment and it is kind of complete equipment with overload short-circuit protection, overvoltage protection, under voltage protection and power leaking protection. This power distribution cabinet is applied to modern buildings, foreign buildings, industrial and mining enterprises and residential houses.
Main Technical Parameters of Power Switch Board
1)Transparent and opaque door: single, two and three rows: open the door to the left or right 180°.
2)Rated Current: 125A
3)Material: Insulation, fire-retardant engineering material; color: white
4)Protection Grade: IP40
5)Fire-resistant Capacity – IEC695-2-1, 650℃/30s
(1) The panel is an ABS engineering material with high strength and never discoloration. The transparent material is PC.
(2) The lid is opened and closed
The box distribution box mask adopts a push-open type of opening and closing mode, and the mask is lightly pressed, and a locking positioning hinge structure is provided when opening.
(3) Wiring design of the distribution box
The rail support plate can be raised to the highest movable point and is no longer constrained by the narrow space when installing the wire. When the installation is convenient, the distribution box switch is provided with a groove and a conduit outlet hole, and various wire slots and conduits that are easy to use.
2.Horizontal swing-up cover
3.Themo plastic frame&cover
4.Press type door latch
5.Multi-slot grounding & neutralterminal
6.Removable din rail frame
7.Galvanized steel (1.0mm) enclosure